Mechatronic offers Torsion Testing Machine (M- TT 10, which are designed to check torsional property of various metal wires, tubes and bars. Further, we also calibrate these machines as perthe latest and relevant industry standards.
Model: M TT 10/20/50
Brand: Mechatronic
Applications: Impact Testing
Industries: Aerospace, Automotive, Electronics, Inks and Coatings, Metal Packaging
Materials: Aluminum, Steel
- Suitable for Torsion and Twist test on various metal rods and flats
- Torque Measurement by pendulum dynamometer system.
- Auto torque selector to adjust torque ranges.
- Geared motor to apply torque to specimen through gearbox.
- Autographic recorder for relation between torque and angle of twist.
- Accuracy + 1 % of the true torque.
- Torque applied to the specimen is transferred to measuring dial through lever mechanism.
- Torque is measured by Pendulum Dynamometer system.
- Torque ranges can be adjusted by required torque at other end of specimen.
- Autographic recorder gives the relation between Torque and Angle of Twist.
- Calibration is within ±1 % within operating range of all models.
| MODEL | UNIT | M TT – 10 | M TT – 20 | M TT – 50 | M TT – 100 |
|---|---|---|---|---|---|
| Capacity | Nm. | 100 | 200 | 500 | 1000 |
| Torque Ranges | Nm. | 20, 50, 100 | 50, 100, 200 | 50, 100, 250, 500 | 100, 250, 500, 1000 |
| Divisions on Dial | Nos. | 500 | 500 | 500 | 500 |
| Test Speed | RPM | 0.5 | 0.5 | 0.5 | 0.5 |
| Clearance Between Grips | mm | 0-420 | 0-450 | 0-500 | 0-600 |
| Grips for Round | 4-8 | 7-10 | 10-17 | 10-18 | |
| Specimen Dia | mm | 8-12 | 10-15 | 17-24 | 18-26 |
| 15-20 | 24-30 | 26-30 | |||
| Grips for Flat Thick | mm | 2-8 | 3-10 | 2-12 | 5-12 |
| Specimen Width | mm | 25 | 30 | 40 | 50 |
| Power Requirement 415 V 50.hz 3 Phase | kW | 0.25 | 0.25 | 1 | 1 |